Huawei Quidway S9300 Configuration Manual - Network Management page 105

Terabit routing switch
Hide thumbs Also See for Quidway S9300:
Table of Contents

Advertisement

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Procedure
Step 1 Configure reachable routes between the Switch and the NMSs. The configuration procedure is
not mentioned.
Step 2 Configure the access control function of SNMP.
<Switch> system-view
# Enter the system view, cancel the version number of SNMP used by the system.
[Switch] undo snmp-agent sys-info version all
# Start the SNMP agent, and set the SNMP version to SNMPv2c.
[Switch] snmp-agent sys-info version v2c
# Set the community name and the access authority.
[Switch] snmp-agent community read public acl 2000
[Switch] snmp-agent community write private acl 2000
Step 3 Configure the SNMP maintenance information.
# Set the contact information about the administrator and the physical location of the Switch.
[Switch] snmp-agent sys-info contact Mr.Wang-Tel:21657
[Switch] snmp-agent sys-info location telephone-closet,2rd-floor
Step 4 Configure the ACL.
[Switch] acl 2000
[Switch-acl-basic-2000] rule permit source 1.1.1.1 0
Step 5 Configure the trap function.
[Switch] snmp-agent trap enable
[Switch] snmp-agent target-host trap address udp-domain 1.1.1.1 params securityname
public v2c
Step 6 Configure the NMS.
Install the iManager U2000 Unified Network Management System on the NMS, configure the
SNMP function of the iManager U2000 Unified Network Management System, and then you
can manage the Switch.
For the configuration and usage of the iManager U2000 Unified Network Management System,
refer to the iManager U2000 Unified Network Management System Product Documentation.
Step 7 Verify the configuration.
# Check the version information about SNMP and the maintenance information.
[Switch] display snmp-agent sys-info
SNMP version running in the system:
# Check the community name.
[Switch] display snmp-agent community
Issue 03 (2010-09-20)
The contact person for this managed node:
Mr.Wang-Tel:21657
The physical location of this node:
telephone-closet,2rd-floor
SNMPv2c
Community name:public
Group name:public
Acl:2000
Storage-type: nonVolatile
Community name:private
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SNMP Configuration
1-77

Advertisement

Table of Contents
loading

Table of Contents