Configuring Rmon2; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual - Network Management

2 RMON and RMON2 Configuration
fragments packets
CRC alignment errors:0
Dropped packet (insufficient resources):1795
Packets received according to length (octets):
64
256-511:3698

2.4 Configuring RMON2

This section describes how to configure RMON2 to monitor the traffic of a certain interface,
analyze the source and destination of data transmitted through the interface, and collect the
statistics on the data of each host that passes through the interface.

2.4.1 Establishing the Configuration Task

Before configuring RMON2, familiarize yourself with the applicable environment, complete
the pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
2.4.2 Configuring the hlHostControlTable
HlHostControlTable is used to monitor the traffic of a specific host.
2.4.3 Configuring the ProtocolDirTable
RMON2 can collect only the IP packet statistics on Ethernet interfaces.
2.4.4 Checking the Configuration
After configuring RMON2, you can view the traffic statistics collected by RMON2.
2.4.1 Establishing the Configuration Task
Before configuring RMON2, familiarize yourself with the applicable environment, complete
the pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
Applicable Environment
By configuring RMON2, you can monitor the traffic on an Ethernet interface that connects to
the network, analyze the hosts the data on the interface comes from and goes to, and collect
statistics of the data passing through the interface from each host on the network.
Pre-configuration Tasks
Before configuring RMON2, configure parameters for Ethernet interface.
Data Preparation
To configure RMON2, you need the following data.
No.
1
2
2-12
:0
:150183 , 65-127
, 512-1023:0
Data
Values of the hlHostControlDataSource and hlHostControlStatus in the
hlHostControlTable
Values of the protocolDirDescr and protocolDirHostConfig in the protocolDirTable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
, jabbers packets
, collisions
:150183 , 128-255
, 1024-1518:0
:0
:0
:1383
Issue 03 (2010-09-20)