Figure 6-30 Networking Diagram Of Sending Test Results To The Ftp Server - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management

Figure 6-30 Networking diagram of sending test results to the FTP server

VLANIF20
11.1.2.1/24
SwitchA
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
6.
7.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Configure parameters for connecting the FTP server.
# Configure the IP address of the client that is connected to the FTP server.
<SwitchA> system-view
[SwitchA] nqa-ftp-record ip-address 11.1.2.8
# Configure the user name for logging into the FTP server.
[SwitchA] nqa-ftp-record username ftp
[SwitchA] nqa-ftp-record password ftp
# Configure the file name for saving test results.
[SwitchA] nqa-ftp-record filename icmp
Step 2 Configure the number of test results to be saved in a file through FTP.
[SwitchA] nqa-ftp-record item-num 10010
Issue 03 (2010-09-20)
FTP server
11.1.2.8/24
GE2/0/0
GE1/0/0
VLANIF10
11.1.1.11/24
Configure parameters for connecting the FTP server.
Enable the FTP server to save test results through FTP.
Configure the number of test results saved through FTP.
Configure the duration of saving test results through FTP.
Configure test results to be sent.
Start the test instance.
Verify the configuration.
User name and password used for logging into the FTP server
Number of test results saved through FTP
Duration of saving test results through FTP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/0
SwitchB
VLANIF10
11.1.1.10/24
6 NQA Configuration
6-233