Configuring The Ftp Download Test - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Context
Procedure
Step 1 Run the display nqa results [ test-instance admin-name test-name ] command to view the test
results on the NQA client.
----End
Example
Run the display nqa results command. If the following is displayed, it means that the test is
successful.
l
l
l
For the ICMP test, you can also view the minimum time, maximum time, and RTT(Round Trip
Time ).
<Quidway> display nqa results
NQA entry(admin, test) :testflag is inactive ,testtype is icmp
1 . Test 1 result

6.6 Configuring the FTP Download Test

This section describes how to configure a File Transfer Protocol (FTP) download test to check
the FTP download performance.
6.6.1 Establishing the Configuration Task
Before configuring an FTP download test, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
6.6.2 Configuring the FTP Download Test Parameters
This part describes how to set parameters for the FTP download test.
6.6.3 Checking the Configuration
After configuring the FTP download test, you can view the test result.
Issue 03 (2010-09-20)
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the display nqa results
command to view test results. By the default, the command output contains the records about only the last
five test results.
"testFlag is inactive"
"The test is finished"
"Completion:success"
The test is finished
Send operation times: 3
Completion:success
Attempts number:1
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Destination ip address:10.112.58.3
Min/Max/Average Completion Time: 2/5/3
Sum/Square-Sum Completion Time: 9/33
Last Good Probe Time: 2010-06-21 15:33:09.2
Lost packet ratio: 0 %
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Receive response times: 3
RTD OverThresholds number: 0
Drop operation number:0
Operation timeout number:0
Connection fail number:0
RTT Stats errors number:0
6 NQA Configuration
6-11