Example For Configuring The Mac Ping Test; Figure 6-13 Networking Diagram For Configuring The Mac Ping Test - Huawei Quidway S9300 Configuration Manual - Network Management

6 NQA Configuration
l

6.37.11 Example for Configuring the MAC Ping Test

Networking Requirements
As shown in
l
l
The NQA MAC Ping test is used to test the connectivity between Switch A and Switch B.

Figure 6-13 Networking diagram for configuring the MAC Ping test

SwitchA
6-162
#
sysname SwitchB
#
vlan batch 100 110
#
interface Vlanif100
ip address 10.1.1.2 255.255.255.0
#
interface Vlanif110
ip address 10.2.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
return
Configuration file of Switch C
#
sysname SwitchC
#
vlan batch 110
#
interface Vlanif110
ip address 10.2.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
nqa-server udpecho 10.2.1.2 9000
#
ip route-static 10.1.1.0 255.255.255.0 10.2.1.1
#
return
Figure 6-13:
CFM is enabled on Switch A and Switch B.
MAs and MDs are configured on Switch A and Switch B.
NQA Client
GE2/0/1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
GE2/0/1
SwitchB
Issue 03 (2010-09-20)