Checking The Configuration - Huawei Quidway S9300 Configuration Manual - Network Management

6 NQA Configuration
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
nqa test-instance admin-name test-name
An NQA test instance is created and the test instance view is displayed.
Step 3 Run:
send-trap { owd-ds | owd-sd }*
Sending trap messages when the transmission delay exceeds the threshold is enabled.
By default, the trap function is disabled.
----End

6.33.6 Checking the Configuration

After the trap function is enabled in an NQA test instance, you can view trap messages in the
trap buffer.
Prerequisite
The configurations of the Trap function are complete.
Procedure
Step 1 Run the display trapbuffer [ size value ] to view the trap messages sent in an NQA test.
----End
Example
Run the display trapbuffer [ size value ] command. If information about the trap messages is
displayed, it means that the configuration succeeds.
For example:
<Quidway> display trapbuffer size 2
Trapping Buffer Configuration and contents:enabled
allowed max buffer size : 1024
actual buffer size : 256
channel number : 3 , channel name : trapbuffer
dropped messages : 0
overwritten messages : 0
current messages : 11
#May
1.3.6.1.4.1.2011.5.25.110.2.0.1 ShortIFIndexMapTable changed.
#May
1.3.6.1.4.1.2011.5.25.129.2.1.18 Physical entity register succeeded.
(EntityPhysicalIndex=17367040, BaseTrapSeverity=2, BaseTrapProbableCause=70144,
BaseTrapEventType=5, EntPhysicalContainedIn=1677721
6, EntPhysicalName="SRU slot 9", RelativeResource="", ReasonDescription="MPU9")
6-128
6 2009 12:54:17 CBB6-PE3 SINDEX/4/INDEXMAP:OID
6 2009 11:02:37 CBB6-PE3 SRM_BASE/4/ENTITYREGSUCCESS: OID
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Issue 03 (2010-09-20)