Huawei Quidway S9300 Configuration Manual - Network Management page 567

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Cluster SNMP NAT capability : enabled
Cluster FTP NAT capability : disabled
There are 4 member(s) in the cluster, and 0 of them are down.
Step 10 Verify the configuration.
l After the previous configuration, run the display current-configuration filter snmp
----End
Configuration Files
l
l
Issue 03 (2010-09-20)
command, you can view that the SNMP agent is enabled, the UDP domain of the
administrator switch is 3.0.0.1, the address of the SNMP host, and the UDP domain of
member switches is 10.0.0.1, the address of the administrator switch. Take the displayed
information about the administrator switch and Member-3 as examples.
[HUAWEI_0.Administrator-1] display current-configuration filter snmp
snmp-agent target-host trap address udp-domain 3.0.0.1 params securityname clus
ter
[HUAWEI_3.Member-3] display current-configuration filter snmp
snmp-agent target-host trap address udp-domain 10.0.0.1 params securityname clu
ster
Configuration file of Administrator-1.
#
sysname Administrator-1
#
vlan batch 10
#
cluster enable
ntdp enable
ntdp hop 5
ntdp timer 10
ndp enable
#
interface Vlanif10
ip address 1.0.0.1 255.0.0.0
#
interface gigabitethernet1/0/1
port link-type trunk
port trunk allow-pass vlan 10
ntdp enable
ndp enable
#
interface gigabitethernet1/0/2
port link-type trunk
port trunk allow-pass vlan 10
ntdp enable
ndp enable
#
cluster
mngvlanid 10
ip-pool 10.0.0.1 255.0.0.0
build HUAWEI
cluster-ftp-nat enable
ftp-server 2.0.0.1
sftp-server 2.0.0.2
logging-host 4.0.0.1
snmp-host 3.0.0.1
#
ip route-static 0.0.0.0 0.0.0.0 1.0.0.2
#
return
Configuration file of Member-1.
#
sysname Member-1
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 HGMP Configuration
8-71