4 LLDP Configuration
Figure 4-4 Networking diagram for configuring LLDP when an interface has multiple neighbors
SwitchA
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
Procedure
Step 1 Enable LLDP globally on Switch A, Switch B, and Switch C.
# Configure Switch A.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] lldp enable
# Configure Switch B.
4-28
SwitchD
SwitchE
10.10.10.1
LLDP interface
NMS: Network Management System
Enable LLDP globally on Switch A, Switch B, and Switch C.
Configure the management addresses of Switch A, Switch B, and Switch C so that the NMS
can identify the devices.
Management addresses of Switch A, Switch B, and Switch C
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuration Guide - Network Management
NMS
LLDPDU
10.10.10.2
SwitchB
Quidway S9300 Terabit Routing Switch
SwitchF
10.10.10.3
SwitchC
SNMP packet
LLDPDU packet
Issue 03 (2010-09-20)