Huawei Quidway S9300 Configuration Manual - Network Management page 108

1 SNMP Configuration
# View the version of SNMP.
[Switch] display snmp-agent sys-info version
SNMP version running in the system:
Step 3 Configure the access rights.
# Configure user group information.
[Switch] snmp-agent group v3 test1
[Switch] snmp-agent group v3 test2
# Configure the access view of the user group.
[Switch] snmp-agent group v3 test1 read-view c write-view c notify-view c
[Switch] snmp-agent group v3 test2 read-view b write-view b notify-view b
# Configure encryption and authentication for the user group.
[Switch] snmp-agent group v3 test1 privacy
[Switch] snmp-agent group v3 test2 privacy
[Switch] snmp-agent group v3 test1 authentication
[Switch] snmp-agent group v3 test2 authentication
# Configure user information.
[Switch] snmp-agent usm-user v3 NMS1 test1 authentication-mode md5 123 privacy-mode
des56 456
[Switch] snmp-agent usm-user v3 NMS2 test2 authentication-mode md5 123 privacy-mode
des56 456
# Configure the MIB view.
[Switch] snmp-agent mib-view include b interfaces
[Switch] snmp-agent mib-view include c iso
Step 4 Configure the trap function.
[Switch] snmp-agent trap enable
[Switch] snmp-agent target-host trap address udp-domain 1.1.1.1 params securityname
NMS1 v3
[Switch] snmp-agent target-host trap address udp-domain 1.1.1.2 params securityname
NMS2 v3
Step 5 Configure the NMS.
Install the iManager U2000 Unified Network Management System on the NMS, configure the
SNMP function of the iManager U2000 Unified Network Management System, and then you
can manage the Switch.
For the configuration and usage of the iManager U2000 Unified Network Management System,
refer to the iManager U2000 Unified Network Management System Product Documentation.
Step 6 Verify the configuration.
<Switch> display snmp-agent group
Group name: test1
1-80
SNMPv3
NOTE
The default view is internet, excluding snmpUsmMIB, snmpVacmMIB, and snmpModules.18. Modifying
the attributes of snmpUsmMIB, snmpVacmMIB, or snmpModules.18 will lead to security problem.
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview :<no specified>
Storage-type: nonVolatile
Group name: test1
Security model: v3 AuthPriv
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Issue 03 (2010-09-20)