Checking The Configuration - Huawei Quidway S9300 Configuration Manual - Network Management

6 NQA Configuration
Step 8 Run:
start
The NQA test is started.
Select the start mode as required because the start command has several forms.
l To perform the NQA test immediately, run the start now [ end { at [ yyyy/mm/dd ]
l To perform the NQA test on schedule, run the start at [ yyyy/mm/dd ] hh:mm:ss [ end { at
l To perform the NQA test after a delay, run the start delay { seconds second | hh:mm:ss }
----End

6.15.3 Checking the Configuration

Prerequisite
The configurations are complete.
Procedure
l
----End
Example
After the MAC ping test is successful, you can see the following information by running the
display nqa results command:
<Quidway> display nqa results
NQA entry(admin, test) :testflag is inactive ,testtype is macping
1 . Test 1 result
6-44
The percentage of failed NQA tests is set.
hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime { seconds second | hh:mm:ss } } ]
command.
[ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime { seconds
second | hh:mm:ss } } ] command.
[ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime
{ seconds second | hh:mm:ss } } ] command.
Run the display nqa results [ test-instance admin-name test-name ] command to view test
result on the NQA client.
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the display nqa results
command to view the test results. The command output contains only the records about the last five tests.
The test is finished
SendProbe:3
Completion:success
OWD OverThresholds SD number:0
Min/Max/Avg/Sum RTT:1/1/1/1
NumOfRTT:3
Operation sequence errors number:0
System busy operation number:0
Min Positive SD:0
Max Positive SD:0
Positive SD Number:0
Positive SD Sum:0
Positive SD Square Sum :0
Min Negative SD:0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
ResponseProbe:3
RTD OverThresholds number:0
OWD OverThresholds DS number:0
RTT Square Sum:3
Drop operation number:0
RTT Stats errors number:0
Operation timeout number:0
Min Positive DS:0
Max Positive DS:0
Positive DS Number:0
Positive DS Sum:0
Positive DS Square Sum :0
Min Negative DS:0
Issue 03 (2010-09-20)