Huawei Quidway S9300 Configuration Manual - Network Management page 543
Terabit routing switch
Hide thumbs
Also See for Quidway S9300:
- Configuration manual (603 pages) ,
- Configuration manual - multicast (262 pages) ,
- Hardware description (224 pages)
Table of Contents
Advertisement
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Interface: GigabitEthernet1/0/2
Step 3 Configure NTDP.
# On devices, enable NTDP in the system view and on the interface and configure the interval
and range for NTDP to collect topologies to 10 minutes and 3 hops respectively.
# Configure the administrator switch.
[Administrator-1] ntdp enable
[Administrator-1] ntdp timer 10
[Administrator-1] ntdp hop 3
[Administrator-1] interface gigabitethernet 1/0/1
[Administrator-1-GigabitEthernet1/0/1] ntdp enable
[Administrator-1-GigabitEthernet1/0/1] quit
[Administrator-1] interface gigabitethernet 1/0/2
[Administrator-1-GigabitEthernet1/0/2] ntdp enable
[Administrator-1-GigabitEthernet1/0/2] quit
# Configure member switch 2.
[Member-1] ntdp enable
[Member-1] ntdp timer 10
[Member-1] ntdp hop 3
[Member-1] interface gigabitethernet 1/0/1
[Member-1-GigabitEthernet1/0/1] ntdp enable
[Member-1-GigabitEthernet1/0/1] quit
[Member-1] interface gigabitethernet 1/0/2
[Member-1-GigabitEthernet1/0/2] ntdp enable
[Member-1-GigabitEthernet1/0/2] quit
# Configure member switch 3.
[Member-2] ntdp enable
[Member-2] ntdp timer 10
[Member-2] ntdp hop 3
[Member-2] interface gigabitethernet 1/0/1
[Member-2-GigabitEthernet1/0/1] ntdp enable
[Member-2-GigabitEthernet1/0/1] quit
# Configure member switch 4.
[Member-3] ntdp enable
[Member-3] ntdp timer 10
[Member-3] ntdp hop 3
[Member-3] interface gigabitethernet 1/0/1
[Member-3-GigabitEthernet1/0/1] ntdp enable
[Member-3-GigabitEthernet1/0/1] quit
After the previous configuration, globally check the NTDP configuration on the administrator
switch. You can find that the interval and range for NTDP to collect topologies is 10 minutes
and 3 hops respectively.
[Administrator-1] display ntdp
Network topology discovery protocol is enabled.
Hops
Issue 03 (2010-09-20)
Port Name
: GigabitEthernet1/0/1
Software Version: Version 5.70 V100R003C00B051
Device Name : Member-1
Port Duplex : FULL
Product Ver : S9300
Status: Enabled, Packets Sent: 6, Packets Received: 16, Packets Error: 0
Neighbor 1:
Aging Time: 5(s)
MAC Address : 0003-0003-0003
Port Name
: GigabitEthernet1/0/1
Software Version: Version 5.70 V100R003C00B051
Device Name : Member-2
Port Duplex : FULL
Product Ver : S9300
: 3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 HGMP Configuration
8-47
Advertisement
Table of Contents
