Dot1X Mac-Auth Port Reset; Dot1X Mac-Auth Vlan-Assign - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call the command without parameters:
no dot1x mac-auth
Result
MAC authentication is disabled for a port.
11.7.3.9

dot1x mac-auth port reset

Description
With this command, you reset MAC authentication for a port.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
dot1x mac-auth port [mac <aa:aa:aa:aa:aa:aa>] reset
The parameters have the following meaning:
Parameter
mac
aa:aa:aa:aa:aa:aa
Result
MAC authentication is reset for the port.
11.7.3.10

dot1x mac-auth vlan-assign

Description
With this command you enable the assignment of the VLAN ID for a MAC address by the
RADIUS server.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
Description
Keyword for a MAC address
MAC address of the interface
Security and authentication
11.7 Port Based Network Access Control
Range of values / note
-
aa:aa:aa:aa:aa:aa
751