Show Spanning-Tree Mst Configuration - Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.3 Spanning Tree
Syntax
Call up the command with the following parameters:
show spanning-tree root
[{address|cost|forward-time|id|max-age|port|priority|detail}]
The parameters have the following meaning:
Parameter
address
cost
forward-time
id
max-age
port
priority
detail
Result
The settings of the root bridge for the spanning tree function are displayed.
6.3.1.9

show spanning-tree mst configuration

Description
This command shows various settings for an instance of the Multiple Spanning Tree
Protocol.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show spanning-tree mst configuration
Result
The settings of an instance of the Multiple Spanning Tree protocol are displayed.
218
Description
Shows the MAC address of the root bridge
Shows the costs of the connection to the root bridge.
Shows the time that the bridge is in the listening mode when changing from
the blocking mode to the learning mode
Shows the ID of the root bridge
Shows the maximum age of the data packet after which it is deleted
Shows the interface via which the spanning tree is set up
Shows the priority of the bridge
Shows detailed information about the root bridge
or
cli#
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10