Layer 3 functions
9.2 OSPFv2 (IPv4)
9.2.3.12
no compatible rfc1583
Description
With this command, you disable compatibility with RFC 1583.
Note
This command is available only with layer 3.
Requirement
You are in the OSPF Router configuration mode.
The command prompt is as follows:
cli(config-ospf)#
Syntax
Call the command without parameters:
compatible rfc1583
Result
The compatibility with RFC 1583 is disabled.
Further notes
You enable the compatibility with the
You can display the status of this function and other information with the
ospf
9.2.3.13
default-information originate
Description
With this command, you enable the function with which a standard route is generated for
external routes into the OSPF routing domain.
Note
This command is available only with layer 3.
466
command.
command.
compatible rfc1583
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
show ip