The "Show" Commands; Show Ip Http Secure Server Status; Show Ssl Server-Cert - Siemens SCALANCE XM-400 Configuration Manual

7.10.1

The "show" commands

This section describes commands with which you display various settings.
7.10.1.1

show ip http secure server status

Description
This command shows the status of the HTTPS server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip http secure server status
Result
The status, cipher suite and version of the HTTPS server are displayed.
7.10.1.2

show ssl server-cert

Description
This command shows the SSL server certificate.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ssl server-cert
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
or
cli#
or
cli#
Network protocols
7.10 HTTPS server
377