Layer 2 management protocols
8.7 MLD Snooping (IPv6)
8.7.1.4
show ipv6 mld snooping globals
Description
This command shows general information on MLD snooping for the device.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameter assignment:
show ipv6 mld snooping globals
Result
The information is displayed.
8.7.1.5
show ipv6 mld snooping statistics
Description
This command shows the MLD snooping statistics for all or a selected VLAN.
Requirement
● MLD snooping is enabled.
● You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show ipv6 mld snooping statistics [Vlan <vlan id>]
The parameters have the following meaning:
Parameter
Vlan
vlan-id
If you specify VLAN, the configuration of all VLANs is displayed.
430
or
cli#
or
cli#
Description
Keyword for a VLAN connection
Number of the addressed VLAN
Range of values / note
-
1 ... 4094
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10