9.5.2.2
show vrrp3 interface - vrid
Description
This command shows the settings of a virtual router.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show vrrp3
[
interface
{
}
<vrID(1-255)>
]
[{
brief|detail|statistics
}]
The parameters have the following meaning:
Parameter
vlan
VlanId
interface-type
interface-id
vrID
brief
detail
statistics
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 39)".
Result
The settings of the virtual router are displayed.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
or
cli#
vlan <VlanId(1-4094)>| <interface-type><interface-id>
Description
Keyword for a VLAN connection
Number of the addressed VLAN
Type or speed of the interface
Slot no. and port no. of the interface.
ID of the virtual router
shows brief information on VRRP
shows detailed information on VRRP.
shows the statistics of the VRRP pro-
tocol
Layer 3 functions
9.5 VRRPv3 (IPv4 / IPv6)
Range of values / note
-
1 ... 4094
Enter a valid interface
1 ... 255
-
-
-
571