Redistribute - Siemens SCALANCE XM-400 Configuration Manual

Layer 3 functions
9.7 RIPng (IPv6)
9.7.3.7

redistribute

Description
With this command you specify which route information is forwarded by RIP.
Note
This command is available only with layer 3.
Requirement
You are in the RIP router configuration mode.
The command prompt is as follows:
cli(config-ripng)#
Syntax
Call up the command with the following parameters:
redistribute {static|connected|ospf} metric <integer(0-16)> [route-map <name(20)>]
The parameters have the following meaning:
Parameter
default
connected
ospf
static
metric
integer
route-map
name
Result
The information forwarded by RIP has been specified.
Further notes
You disable the forwarding with the
You display the setting and other information with the
618
Description
Default routes are distributed.
Route information of local subnets (IP
interfaces) is distributed for which RIP
is not configured.
Routes learned by OSPF are distribut-
ed.
Static routes are distributed.
Keyword for the metric of the external
standard route.
Value of the metric (hop counter)
Keyword for a route map.
Name of the route map.
no redistribute
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Range of values / note
-
-
-
-
-
0 ... 16
15 longest possible distance
16: unreachable
-
Maximum of 20 characters
command.
command.
show ipv6 rip
Configuration Manual, 11/2015, C79000-G8976-C252-10