Clear Spanning-Tree Detected Protocols - Siemens SCALANCE XM-400 Configuration Manual

Industrial ethernet switches

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Network structures

6.3 Spanning Tree

Further notes

You display the general settings for the Spanning Tree Protocol with the

clear spanning-tree detected protocols

With this command, you restart the protocol transmission process on a specific or on all

interfaces and force renegotiation of the connection settings with the neighboring devices.

You are in the Privileged EXEC mode.

The command prompt is as follows:

Call up the command with the following parameters:

clear spanning-tree detected protocols

[{interface<interface-type><interface-id>}]

The parameters have the following meaning:

interface-type

interface-id

For information on names of addresses and interfaces, refer to the section "Interface

identifiers and addresses (Page 39)".

If you do not select any parameters from the parameter list, the process is restarted for all

The connection settings for spanning tree are renegotiated.

Keyword for a an interface description

Type or speed of the interface

Module no. and port no. of the interface

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Range of values / note

Enter a valid interface.

Configuration Manual, 11/2015, C79000-G8976-C252-10

show spanning-tree

Show Quick Links

Table of Contents

Scalance xr-500