No Switchport Map Protocols-Group - Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.1 VLAN
Syntax
Call up the command with the following parameters:
switchport map protocols-group
The parameters have the following meaning:
Parameter
group id
vlan
vlan-id
Result
The group is assigned to the port and the VLAN.
Further notes
You delete the setting with the
You can display the status of this function and other information with the
protocols-group
6.1.3.8

no switchport map protocols-group

Description
With this command, you delete the assignment of a configured protocol group to a specific
VLAN.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
no switchport map protocols-group <group id(0-2147483647)>
The parameter has the following meaning:
Parameter
group id
Result
The assignment is deleted.
192
<group id(0-2147483647)>vlan<vlan-id(1-4094)>
Description
Number of the group
Keyword for a VLAN connection
Number of the addressed VLAN
no switchport map protocols-group
command.
Description
Number of the group
Range of values / note
0 ... 2147483647
-
1 ... 4094
command.
Range of values / note
0 ... 2147483647
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
show vlan