No Ipv6 Path Mtu Discover; Ipv6 Route - Siemens SCALANCE XM-400 Configuration Manual

7.2.3.6

no ipv6 path mtu discover

Description
With this command, you disable the PMTU Discovery function.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no ipv6 path mtu discover
Result
The PMTU Discovery function is disabled.
Further notes
You enable the PMTU Discovery function with the command
You display the settings with the
7.2.3.7

ipv6 route

Description
With this command, you configure a static entry in the IPv6 routing table.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
command.
show ipv6 pmtu
Network protocols
7.2 IPv6 protocol
ipv6 path mtu discover
.
289