Siemens SCALANCE XM-400 Configuration Manual page 739

Syntax
Call up the command with the following parameters:
authorized-manager ip-source <ip-address>
[{<subnet-mask>|/<prefixlength(0-32)>}]
[interface[<interface-type><0/a-b,0/c,...>]
[vlan<a,b or a-b or a,b,c-d>]
[cpu0]
[service[snmp][telnet][http][https][ssh]]
The parameters have the following meaning:
Parameter
ip-address
subnet-mask
prefixlength
interface
interface-type
0/a-b,0/c,...
vlan
a,b or a-b or
a,b,c-d
cpu0
service
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 39)".
The IP address 0.0.0.0 means "any manager".
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
[<interface-type><0/a-b,0/c,...>]]
Description
Specifies the network or the IP address
for which the IP manager is authorized
Subnet mask that restricts the authori-
zation
Decimal representation of the mask as
a number of "1" bits
Keyword for a an interface description
Type of interface
Module no. and port no. of the interface
Keyword for a VLAN connection
Number of a VLAN or VLAN range
the Out of Band- interface is configured
as a management Interface
Specifies the services for which the
manager is authorized.
You can select several options.
Security and authentication
11.6 Management Access Control List
Range of values / note
Enter a valid IPv4 address or a
network.
Enter a valid mask.
0 ... 32
-
Enter a valid interface.
-
Enter a valid VLAN or VLAN
range.
-
•
snmp
•
telnet
•
http
•
https
•
ssh
739