Further notes
You can display the status of this function and other information with the
interface
6.3.5.8
spanning-tree bpdu-receive
Description
With this command, you enable or disable the BPDU receive status at the port.
Requirement
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
spanning-tree bpdu-receive{enabled|disabled}
The parameters have the following meaning:
Parameter
enabled
disabled
Result
The BPDU receive status is enabled or disabled.
Further notes
You can display the status of this function and other information with the
interface
6.3.5.9
spanning-tree bpdufilter
Description
With this command, you configure the BPDU transmit status for a port.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
command with the
detail
Description
BPDU packets are received at the port
BPDU packets are ignored at the port
command with the
detail
option.
option.
Network structures
6.3 Spanning Tree
show spanning-tree
Range of values / note
Default: enabled
-
show spanning-tree
241