The "Show" Commands; Show Rmon - Siemens SCALANCE XM-400 Configuration Manual

Industrial ethernet switches

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

The "show" commands

This section describes commands with which you display various settings.

This command shows the settings of the remote monitoring function.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call up the command with the following parameters:

show rmon [statistics [<stats-index (1-65535)>]] [alarms] [events] [history [history-

index (1-65535)] [overview]]

The parameters have the following meaning:

history-index

With this command, you can display several parameters with one call.

If you do not select any parameters from the parameter list, only the

status is shown.

The settings of the remote monitoring function are displayed.

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 11/2015, C79000-G8976-C252-10

Shows counts for various packet char-

acteristics and sizes.

Index number for the statistical values

Shows the threshold values and event

assignments for alarms.

Shows the status and the actions that

are triggered.

Shows the stored statistical values for

earlier transmission periods.

Index number for the previous statisti-

Displays an overview.

Range of values / note

Show Quick Links

Table of Contents

Scalance xr-500