No Mac Access-List Extended - Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.3 MAC access control list
Further notes
You delete the MAC access control list with the
You exit the MAC ACL configuration mode with the
You display the configuration of the access control list with the
11.3.2.2

no mac access-list extended

Description
With this command, you delete a MAC access control list.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no mac access-list extended<short(1-128)>
The parameter has the following meaning:
Parameter
short
Result
The MAC access control list is deleted.
Further notes
You generate a MAC ACL with the
You display the configuration of the access control list with the
700
Description
Number of the access control list
mac access-list extended
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
no mac access-list extended
command.
exit
show access-lists
Range of values / note
1 ... 128
command.
show access-lists
Configuration Manual, 11/2015, C79000-G8976-C252-10
command.
command.
command.