Show User-Accounts; Show User-Groups - Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.1 User management
11.1.1.2

show user-accounts

Description
This command shows the created users.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call up the command with the following parameters:
show user-accounts [external]
The parameter has the following meaning:
Parameter
external
If you do not specify the optional parameters, the local users are shown.
Result
The created users are shown.
Further notes
You create a new local user and create an entry in the table "External User Accounts" with
the
You link a user created on an external server with a role on the device in the table External
User Accounts" with the
You delete a local user and the corresponding entry in the table "External User Accounts"
with the
You delete a link in the table "External User Accounts" with the
command.
11.1.1.3

show user-groups

Description
This command shows the links between groups and roles.
676
Description
Keyword for the table "External User Accounts"
command.
user-account
user-account-ext
command.
no user-account
command.
no user-account-ext
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
Range of values / note
-