The "Show" Commands; Show Events Smtp-Server; Show Events Sender Email - Siemens SCALANCE XM-400 Configuration Manual

Network protocols
7.8 SMTP Client
7.8.1

The "show" commands

This section describes commands with which you display various settings.
7.8.1.1

show events smtp-server

Description
This command shows the configured e-mail servers.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show events smtp-server
Result
The configured e-mail servers are displayed.
7.8.1.2

show events sender email

Description
This command shows the configured e-mail sender address.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show events sender email
368
or
cli#
or
cli#
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10