Show Ipv6 Pmtu; Show Ipv6 Route - Siemens SCALANCE XM-400 Configuration Manual

Further notes
You configure a static entry with the
7.2.2.2

show ipv6 pmtu

Description
This command shows the settings for Path MTU.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameter assignment:
show ipv6 pmtu
Result
The settings are displayed.
7.2.2.3

show ipv6 route

Description
This command shows the routes currently being used.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameter assignment:
show ipv6 route
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
or
cli#
or
cli#
command.
ipv6 neighbor
Network protocols
7.2 IPv6 protocol
281