Layer 3 functions
9.2 OSPFv2 (IPv4)
Result
The information on the selected LSA type is displayed.
9.2.1.5
show ip ospf border-routers
Description
This command shows the routes to the area border routers and to the AS boundary routers.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip ospf border-routers
Result
The routes are displayed.
9.2.1.6
show ip ospf interface
Description
This command shows the information on the OSPF interface.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
444
or
cli#
or
cli#
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10