Username - Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.1 User management
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no user-group <user-group-name>
The parameter has the following meaning:
Parameter
user-group-name
Result
The link is deleted.
Further notes
You link a group with a role with the
You show the created links with the
11.1.4.9

username

Description
With this command, you change the password of the factory set default users "
"
admin
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
688
Description
Group name
".
Range of values / note
Enter the name of a group.
command.
user-group
command.
show user-groups
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
" and
user