Ipv6 Path Mtu Discover - Siemens SCALANCE XM-400 Configuration Manual

Network protocols
7.2 IPv6 protocol
Syntax
Call up the command with the following parameters:
no ipv6 path mtu <prefix addr>
The parameter has the following meaning:
Parameter
prefix addr
Result
The setting for the maximum packet size is no longer used.
Further notes
You display the configuration with the
You configure the maximum packet size with the
7.2.3.5

ipv6 path mtu discover

Description
With this command, you enable the PMTU Discovery function. The function automatically
determines the optimum packet size along the path.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
ipv6 path mtu discover
Result
The PMTU Discovery function is enabled.
Further notes
You disable the PMTU Discovery function with the command
You display the settings with the
288
Description
IPv6 address of the recipient
show ipv6 pmtu
show ipv6 pmtu
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Range of values / note
Enter a valid IPv6 address
command.
command.
ipv6 path mtu
no ipv6 path mtu discover
command.
Configuration Manual, 11/2015, C79000-G8976-C252-10
.