No Switchport Pvid; Tia Interface - Siemens SCALANCE XM-400 Configuration Manual

6.1.3.14

no switchport pvid

Description
With this command, you reset the setting for the port VLAN identifier (PVID) for an interface
to the default value.
The default value is 1.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no switchport pvid
Result
The setting is reset to the default value.
Further notes
You configure the setting with the
You configure the VLAN ID with the
You can display the status of this function and other information with the
config
6.1.3.15

tia interface

Description
With this command, you enable or disable the property TIA interface. The interface can be
used for PNIO.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
command.
command.
switchport pvid
switchport access vlan
Network structures
6.1 VLAN
command.
show vlan port
197