3.1.1.4
show env temperature
Description
This command shows the temperature of the system.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show env temperature
Result
The temperature of the system is displayed.
3.1.1.5
show hardware
Description
This command shows the type and number as well as the position of the installed interface
cards of the system.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show hardware
Result
The table of interface cards is displayed.
The slot ID, the status and the type or name of the card is listed.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
or
cli#
Configuration
3.1 System
59