Show Ring-Redundancy; Show Ring-Redundancy Manager Counters - Siemens SCALANCE XM-400 Configuration Manual

Industrial ethernet switches

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Layer 2 management protocols

8.4 Ring redundancy and standby connection

show ring-redundancy

With this command, you show the current configuration of the ring redundancy and standby

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

show ring-redundancy

The current configurations are displayed.

With this command, you display the following information:

● How often the device as redundancy manager switched to the active status, i.e. closed

● The maximum delay time of the test frames of the redundancy manager.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

show ring-redundancy manager counters

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 11/2015, C79000-G8976-C252-10

Show Quick Links

Table of Contents

Scalance xr-500