Smtp-Port - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call the command without parameters:
send test mail
Result
An e-mail according to the currently configured SMTP settings was sent.
Further notes
You can display the current SMTP settings with the
7.8.2.6

smtp-port

Description
With this command, you configure an SMTP port.
Requirement
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli(config-events)#
Syntax
Call up the command with the following parameters:
smtp-port <smtp-port(1-65535)>
The parameter has the following meaning:
Parameter
smtp-port
Result
An SMTP port is configured.
Further notes
You can reset the setting to the default with the
You display the setting with the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
Description
Value for the SMTP port
show smtp-port
show events emailserver
Range of values / note
1 ... 65535
Default: 25
command.
no smtp-port
command.
Network protocols
7.8 SMTP Client
command.
373