Show Ip Igmp Snooping Statistics - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call up the command with the following parameters:
show ip igmp snooping forwarding-database [Vlan<vlan id>]
The parameters have the following meaning:
Parameter
Vlan
vlan id
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 39)".
Result
The multicast forwarding entries are displayed.
8.2.1.3

show ip igmp snooping statistics

Description
This command shows the statistical information about IGMP snooping for all or a selected
VLAN.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show ip igmp snooping statistics [Vlan<vlan id>]
The parameters have the following meaning:
Parameter
Vlan
vlan id
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 39)".
Result
The statistical information is displayed.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
Description
Keyword for a VLAN connection
Number of the addressed VLAN
or
cli#
Description
Keyword for a VLAN connection
Number of the addressed VLAN
Layer 2 management protocols
8.2 IGMP snooping
Range of values / note
-
1 ... 4094
Range of values / note
-
1 ... 4094
393