Network structures
6.4 Passive Listening
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show passive-listening
Result
disabled
enabled
6.4.2
passive-listening
Description
This command enables "passive listening".
Requirement
Note
No simultaneous operation with MSTP
"Passive listening" can only be enabled when MSTP is disabled.
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
passive-listening
Result
The "passive listening" function is enabled.
256
or
cli#
is displayed if "passive listening" is disabled. If "passive listening" is enabled,
is displayed.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10