Snmp View - Siemens SCALANCE XM-400 Configuration Manual

Network protocols
7.7 SNMP
7.7.2.20

snmp view

Description
With this command, you configure an SNMP view.
Requirement
● An SNMP group has been created
● The access to the group is configured with
● You are in the Global Configuration mode.
The command prompt is:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp view <ViewName><OIDTree>[mask<OIDMask>]{included|excluded}
[{volatile|nonvolatile}]
The parameters have the following meaning:
Parameter
ViewName
OIDTree
mask
OIDMask
View type
Storage type
If optional parameters are not specified when configuring, the default values apply.
Result
The SNMP view is configured.
366
snmp access
Description
Name of the SNMP view
Object ID
Keyword for the OID mask
Mask that filters access to the ele-
ments of the MIB tree
Specifies whether the filtered elements
are used or excluded
specifies whether the settings remain
following a restart:
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Range of values / note
max. 32 characters
Path information of the MIB tree
-
A series of "
by dots in keeping with the path
information of the MIB tree
•
include
•
excluded
•
volatile
The settings are lost after a
restart
•
nonvolatile
The settings are retained after
a restart (default)
Configuration Manual, 11/2015, C79000-G8976-C252-10
" and " " separated
0 1
(Default)
(volatile):
(non-volatile):