Show Monitor Session - Siemens SCALANCE XM-400 Configuration Manual

Diagnostics
12.4 Port Mirroring
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameter assignment:
show monitor barrier
Result
The settings are displayed.
12.4.1.3

show monitor session

Description
This command shows the settings used for mirroring ports.
You obtain information about the ports from which incoming and/or outgoing data traffic is
mirrored and the port at which the mirrored data is output.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show monitor {session <session-id(1-7)>}
The parameters have the following meaning:
Parameter
session
session-id
Result
The settings for mirroring ports are displayed.
796
or
cli#
or
cli#
Description
Keyword for a session whose settings
are displayed
Number of the session
Range of values / note
-
1 ... 7
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10