No Ip Http; Https Server - Siemens SCALANCE XM-400 Configuration Manual

Network protocols

7.10 HTTPS server

Result
HTTP is enabled on the device.
Further notes
You can display the setting of this function and other information with the
server status
You deactivate HTTP on the device with the
7.9.2.2

no ip http

Description
With this command, you disable HTTP on the device.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no ip http
Result
HTTP is disabled on the device.
Further notes
You can display the setting of this function and other information with the
server status
You enable HTTP with the
7.10 HTTPS server
This section describes commands of the Hypertext Transfer Protocol Secure (HTTPS).
376
command.
command.
command.
ip http
command.
no ip http
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
show ip http
show ip http