The "Show" Commands; Show Vrrp Interface - Siemens SCALANCE XM-400 Configuration Manual

9.4.1

The "show" commands

This section describes commands with which you display various settings.
9.4.1.1

show vrrp interface

Description
This command shows the settings of VRRP for the interface.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show vrrp
[
interface
{
}
]
[{
brief|detail|statistics
}]
The parameters have the following meaning:
Parameter
vlan
VlanId
interface-type
interface-id
brief
detail
statistics
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 39)".
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
or
cli#
vlan <VlanId(1-4094)>| <interface-type><interface-id>
Description
Keyword for a VLAN connection
Number of the addressed VLAN
Type or speed of the interface
Module no. and port no. of the interface
shows brief information on VRRP
shows detailed information on VRRP.
shows the statistics of the VRRP pro-
tocol
Layer 3 functions
9.4 VRRPv2 (IPv4)
Range of values / note
-
1 ... 4094
Enter a valid interface.
-
-
-
549