Layer 3 functions
9.5 VRRP
Parameters
interface-id
brief
detail
statistics
For information on names of addresses and interfaces, refer to the section "Addresses and
interface names (Page 30)".
Result
The settings for the interface are displayed.
9.5.2
show vrrp interface - vrid
Description
This command shows the settings of a virtual router.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show vrrp
[
interface
{
}
<VrId(1-255)>
]
[{
}]
432
Description
Slot no. and port no. of the
interface
shows brief information on VRRP
shows detailed information on
VRRP.
shows the statistics of the VRRP
protocol
or
cli#
vlan <VlanId(1-4094)>| <interface-type><interface-id>
brief|detail |statistics
Range of values
Enter a valid interface name
-
-
-
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07