D.3.2 Etsi Node Default Settings - Cisco ONS 15454 DWDM Installation And Operation Manual

D.3.2 ETSI Node Default Settings

Table D-22 OSC-CSM Card Default Settings (ETSI) (continued)
Default Name
OSC_CSM.pmthresholds.ms.nearend.15min.UAS
OSC_CSM.pmthresholds.ms.nearend.1day.BBE
OSC_CSM.pmthresholds.ms.nearend.1day.EB
OSC_CSM.pmthresholds.ms.nearend.1day.ES
OSC_CSM.pmthresholds.ms.nearend.1day.SES
OSC_CSM.pmthresholds.ms.nearend.1day.UAS
OSC_CSM.pmthresholds.rs.nearend.15min.BBE
OSC_CSM.pmthresholds.rs.nearend.15min.EB
OSC_CSM.pmthresholds.rs.nearend.15min.ES
OSC_CSM.pmthresholds.rs.nearend.15min.SEFS
OSC_CSM.pmthresholds.rs.nearend.15min.SES
OSC_CSM.pmthresholds.rs.nearend.1day.BBE
OSC_CSM.pmthresholds.rs.nearend.1day.EB
OSC_CSM.pmthresholds.rs.nearend.1day.ES
OSC_CSM.pmthresholds.rs.nearend.1day.SEFS
OSC_CSM.pmthresholds.rs.nearend.1day.SES
D.3.2 ETSI Node Default Settings
Table D-23 on page D-107
assembly. Cisco provides the following user-configurable defaults for each Cisco ONS 15454 node:
•
•
•
•
•
•
•
•
•
•
•
•
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
D-106
lists the Cisco ONS 15454 node-level default settings for the ETSI shelf
SNCP settings—Set the threshold level for signal degradation and failure for subnetwork connection
protection (SNCP) circuits.
Craft Access Only—Allows CTC connectivity to the node only through the craft access port.
CTC IP Display Suppression—Prevents display of node IP addresses in CTC (applicable for all
users except Superusers).
Defaults Description—Names the current defaults file on the node.
Enable Firewall—Enables or disables the use of a firewall for accessing the node.
Enable Proxy—Enables or disables the use of a proxy server with the node.
IIOP Listener Port—Sets the IIOP listener port number.
LCD IP setting—Sets the node LCD screen to display the node IP address and use the buttons on
the LCD panel, only display the IP address, or suppress display of the IP address.
Login Warning Message—Warns users at the login screen about the possible legal or contractual
ramifications of accessing equipment, systems, or networks without authorization.
NTP SNTP Server—Sets the IP address of the NTP SNTP server to be used with the node.
Time Zone—Sets the time zone where the node is located.
Use DST—Enables or disables the use of Daylight Savings Time.
Default Value
3 (seconds)
13120 (count)
13120 (count)
864 (seconds)
4 (seconds)
10 (seconds)
10000 (count)
10000 (count)
500 (seconds)
500 (seconds)
500 (seconds)
100000 (count)
100000 (count)
5000 (seconds)
5000 (seconds)
5000 (seconds)
Appendix D Network Element Defaults
Default Domain
0–900
0–13219200
0–13219200
0–86400
0–86400
0–86400
0–138600
0–138600
0–900
0–900
0–900
0–13305600
0–13305600
0–86400
0–86400
0–86400
August 2005