4
Operating Guides
5 Press Noise Source State menu key and set it to Normal.
Figure 4-8
6 Monitor the output power (noise) on the measurement screen at different
If any abnormalities are observed during the operator's check, please contact
NOTE
Keysight Technologies or our sales representative.
46
The Noise Source LED switches between blue and green color at a fast rate,
and
Figure 4-8
shows a typical P
Typical P
modes. Results appear as per typical plot shown in
Figure
4-8.
and P
hot
cold
and P
plot at Normal state
hot
cold
Keysight U1832A/B/C and U1833A/B/C/D User's Guide
plot at Normal state.
Figure
4-6,
Figure 4-7
and