Dot1X Mandatory-Domain; Dot1X Max-User - H3C s3100 series Command Manual

Example
# Enable the handshaking packet secure function.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] dot1x handshake secure

dot1x mandatory-domain

Syntax
dot1x mandatory-domain domain-name
undo dot1x mandatory-domain
View
Ethernet Interface view
Parameters
domain-name: ISP domain name, a case-insensitive string of 1 to 128 characters.
Description
Use the dot1x mandatory-domain command to specify the mandatory authentication domain for
users accessing the port.
Use the undo dot1x mandatory-domain command to remove the mandatory authentication domain.
By default, no mandatory authentication domain is specified.
Note that:
When authenticating an 802.1X user trying to access the port, the system selects an authentication
domain in the following order: the mandatory domain, the ISP domain specified in the username,
and the default ISP domain.
The specified mandatory authentication domain must exist.
Examples
# Configure the mandatory authentication domain my-domain for 802.1X users on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] dot1x mandatory-domain my-domain

dot1x max-user

Syntax
dot1x max-user user-number [ interface interface-list ]
undo dot1x max-user [ interface interface-list ]
View
System view, Ethernet port view
1-10