Hitachi Compute Blade 2000 User Manual page 185

See EFI setup in Server Blade Web Console Function for details about setting the
memory mode on the server blade web console.
On the North Bridge sub-menu, you can check the Memory Mode and NUMA
settings, but you must not attempt to change the settings.
Change the Memory Mode and NUMA settings, if necessary, only from the server
blade Web console.
The settings on the North Bridge sub-menu can be viewed only. They must not be
changed. Be careful because if a setting is changed inadvertently, the EFI may not
start.
(2) Checking and Setting Wake On Lan
To check the Wake On Lan setting, select South Bridge on Figure 5-6: Chipset
Menu to show the following sub-menu.
Figure 5-8: South Bridge Sub-Menu
Wake On Lan is always set to Enable.
If the setting appears as Disable for any reason, change it to Enable. On the South
Bridge sub-menu, Wake On LAN is the only setting you can change. You must not
change the other settings.
134