Hitachi Compute Blade 2000 User Manual page 180

 Checking the installed memory
After increasing or replacing memory, you can check the amount of installed memory
from the following item. Note that the displayed size is the total memory.*
In this example, 6144 MB of memory is installed.
*Note that when memory mirroring mode is enabled, the displayed size is one half of
the total installed memory.
 Setting the server blade system time
You can check and set the date and time set in the server blade system.
Move the cursor to the item you want to change.
Use the Tab key to toggle between System Date and System Time. To change the
setting, use the plus (+) and minus (-) keys.
129