Ipmi Over Lan - Hitachi Compute Blade 2000 User Manual

 IPMI Over LAN
You can set IPMI Over LAN to user accounts.
#
1 Refresh
2 Select
3 User ID
4 Status
5 User name
6 Privilege Level
7 Edit
For User ID1, you can change only Status:

Enable or Disable.
User ID1 is set by default at the factory as

follows:
Status: Enable, User name: (blank); Password:
(blank); Privilege Level: Administrator.
When you turn a server blade on or off from

ServerConductor/Blade Server Manager, add the
server chassis to management targets for
Server/Conductor/Blade Server Manager before
changing settings for IPMI user ID 1.
Item
Reloads the user account information.
Selects user accounts.
ID for the user account
Shows Enable or Disable the user account.
User account name
A privilege level given to the user account
Goes to the Edit IPMI Over LAN User Account
screen, but does not go there without the
option button checked,
114
Description