Hitachi Compute Blade 2000 User Manual page 202

See the BMC manual about setting the memory mode on the server blade Web
console.
On the North Bridge sub-menu, you can check the Memory Mode and NUMA
settings, but you must not attempt to change the settings.
Change the Memory Mode and NUMA settings, if necessary, only from the server
blade web console.
The settings on the North Bridge sub-menu can be viewed only. They must not be
changed. If a setting is changed inadvertently, the EFI might not start.
(2) Checking and setting Wake On Lan
To check the Wake On Lan setting, select South Bridge on the Chipset menu.
Figure 5-28: South Bridge to set WOL
Wake On Lan is always set to Enabled.
If the setting appears as Disable, change it to Enable. On the South Bridge sub-
menu, Wake On LAN (WOL) is the only setting you can change. You must not
change the other settings.
151