Hitachi Compute Blade 2000 User Manual page 164

 DNS Client
You can set the IP addresses of DNS servers on the following screen to have the
server blade do name resolution using DNS. Up to 3 IP addresses can be specified.
# Item
1 Refresh
DNS Server IP Address
2
1-3
3 Reset
4 Modify
Description
Reloads the information.
Sets the IP addresses of DNS servers.
Up to 3 IP addresses can be specified. The IP
address on the top of the screen is used first,
then one in the middle, and the bottom one the
last.
If you do not use the second and/or third DNS
servers, enter 0.0.0.0 to those fields.
If you do not use DNS, set 0.0.0.0 to all the
fields.
Cancels the edited settings.
Validates the edited settings and moves to the
confirmation screen.
113